To 22-315, 22-801, 814 System Error Rap - Xerox WorkCentre 5687 Series Service Manual

22-306 to 22-315, 22-801, 814 System Error RAP

22-306 No proposal for rejection.
22-307 Reschedule Error. Can not find reschedule point for rejection.
22-309 No accept time out error. Consecutive no accepts received from a module exceeds the
threshold value (20). Five consecutive 22-309s will cause a 22-819.
22-310 Image sequence error. Job terminated.
22-315 Module completion no response fault. One or more modules did not respond with com-
pletion message.
22-801 Module completion message received after IOT returned to standby.
22-814 Module registration late error. Module registration message received beyond required
time window.
Initial Actions
• Switch off the machine, then switch on the machine, GP 14.
• Check for and clear any obstructions in the paper path.
Procedure
• If a 22-315 fault code is displayed, go to the 06-340 ROS Laser Failure RAP.
• If the problem persists, the jobs may be beyond the capabilities of the machine. Request
the customer to select job parameters that are within the capabilities of the machine.
Status Indicator RAPs
22-306 to 22-315, 22-801, 814, 22-316, 22-810, 22-820
22-316, 22-810, 22-820 Capability That Does Not Exist RAP
22-316 Job requires a paper tray that does not exist. Job terminated.
22-810 Job required IOT capability that does not exist. Job terminated.
22-820 Job required finishing capability that does not exist. Job terminated.
Procedure
• The job will be terminated and must be resent with acceptable instructions that are within
the capabilities of the machine.
• If the error recurs, switch off the machine, then switch on the machine, GP 14.
August 2007
2-722 WorkCentre 5687 Family