Xerox WorkCentre 5687 Series Service Manual page 1500

5. Figure 1, remove the idler roller.
3
Push the other bearing
though the frame to
remove the idler roller
2
Push out shaft and
remove one bearing
Figure 1 Idler roller removal
Repairs/Adjustments
REP 11.29-171
1
Remove E-clip
6. Figure 2, remove the BM conveyor belt.
1
Release belt from the drive pulley
Replacement
Reverse the removal procedure to replace the BM conveyor belts.
August 2007
4-480
2
Feed the belt through
the cut-out to remove
Figure 2 Belt removal
WorkCentre 5687 Family