REP 10.18 Inverter Output Guide Assembly
Parts List on PL 10.11
Removal
WARNING
Switch off the electricity to the machine, GP 14. Disconnect the power cord from the
customer supply while performing tasks that do not need electricity. Electricity can
cause death or injury. Moving parts can cause injury.
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
1.
Remove the inverter assembly, REP 10.2.
2.
Release the nip roll guide, Figure 1.
3
Lift the guide to release the nip
roll guide
Figure 1 Release nip roll guide
3.
Remove the output guide, Figure 2.
WorkCentre 5687 Family
1
Disconnect the
harness
2
Remove two screws
1
Remove two screws
Figure 2 Remove the output guide
Replacement
The replacement is the reverse of the removal procedure. Refer to GP 6 before refitting the
screws.
August 2007
4-203
2
Remove two screws
3
Flex the side plates to release the
output guide
Repairs/Adjustments
REP 10.18