Xerox WorkCentre 5687 Series Service Manual page 1125

Replacement
1. The replacement is the reverse of the removal procedure.
2. Position the tray 5 module and align the docking guides with the machine, Figure 3
Align the tray 5 module with the
docking plate on the machine. Push
the module to dock and lock the tray
5 module to the machine.
Figure 3 Docking the Tray 5 module
WorkCentre 5687 Family
3. Release the transit lock and push the tray 5 module into the docked position against the
machine, Figure 4.
Figure 4 Release transit lock
4. Go to ADJ 7.3 Machine to Tray 5 Alignment and complete the adjustment.
August 2007
4-105
Lift the latch and move to the left to
release the lock
Repairs/Adjustments
REP 7.19