Xerox WorkCentre 5687 Series Service Manual page 1436

REP 11.56-170 BM Right Hand Cover
Parts List on PL 11.88
Removal
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
WARNING
Switch off the electricity to the machine GP 14. Disconnect the power cord from the cus-
tomer supply while performing tasks that do not need electricity. Electricity can cause
death or injury. Moving parts can cause injury.
1. Remove the rear cover, REP 11.1-170.
2. Open the BM front door and fully pull out the BM module.
3. Remove the crease blade knob (6d), PL 11.80 Item 4.
4. Remove the crease roll handle (6c), PL 11.80 Item 5.
5. Remove the BM front cover, PL 11.80 Item 3.
6. Figure 1, Prepare to remove the BM right hand cover.
Repairs/Adjustments
REP 11.56-170
August 2007
4-416 WorkCentre 5687 Family