Xerox WorkCentre 5687 Series Service Manual page 1147

REP 8.17 Wait Sensor (65-87ppm)
Parts List on PL 7.30
Removal
WARNING
Switch off the electricity to the machine, GP 14. Disconnect the power cord from the
customer supply while performing tasks that do not need electricity. Electricity can
cause death or injury. Moving parts can cause injury.
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
1. Remove the left hand door, REP 7.5.
2. Prepare to remove the door cover, Figure 1.
1
Remove screws
Figure 1 Preparation
WorkCentre 5687 Family
3. Remove the door cover, Figure 2.
1
Remove the cover from the
left hand door assembly.
Figure 2 Remove the door cover
August 2007
4-127
Repairs/Adjustments
REP 8.17