Table of Contents
Advertisement
6.
Figure 4, Remove the bracket and the slide rail from the left side of the BM module.
2
Cut the five cable ties to
3
release the harness
Remove the bracket
and the slide rail
Figure 4 Remove the bracket and slide rail
7.
Figure 5, Remove the two brackets from the slide rail
Repairs/Adjustments
REP 11.62-170
4
Remove the bracket from the
slide rail
1
Remove four screws
Replacement
1.
Reverse the removal procedure to replace the slide assembly.
2.
Ensure that all of the cable ties are installed and the harness are in the correct position.
3.
Check that all of the PJs are connected.
August 2007
4-436
3
Remove screw
2
Remove the bracket from
the slide rail
Figure 5 Remove the bracket from the slide rail
1
Remove screw
WorkCentre 5687 Family
Hide quick links:
Advertisement
Chapters
Table of Contents
