Xerox WorkCentre 5687 Series Service Manual page 1412

REP 11.43-170 CC Transport Shaft Assembly
Parts List on PL 11.75
Purpose
This procedure is used to repair the following components.
• Transport shaft, PL 11.75 Item 8.
• Transport shaft pulley, PL 11.75 Item 9.
• Guide roller, PL 11.75 Item 11.
• Compiler belt, PL 11.75 Item 12.
• Feed chute, PL 11.75 Item 13.
Removal
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
WARNING
Switch off the electricity to the machine GP 14. Disconnect the power cord from the cus-
tomer supply while performing tasks that do not need electricity. Electricity can cause
death or injury. Moving parts can cause injury.
1. Remove transport motor 2, REP 11.38-170.
2. Figure 1, prepare to remove the transport shaft assembly.
Repairs/Adjustments
REP 11.43-170
1
Remove E-clip and bearing
3. Figure 2, Remove the transport shaft assembly.
August 2007
4-392
2
Remove 2 E-clips, pulley
and bearing
Figure 1 Preparation
WorkCentre 5687 Family