Xerox WorkCentre 5687 Series Service Manual page 1514

REP 11.40-171 HVF Input Roll
Parts List on PL 11.155
Removal
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
WARNING
Switch off the electricity to the machine GP 14. Disconnect the power cord from the cus-
tomer supply while performing tasks that do not need electricity. Electricity can cause
death or injury. Moving parts can cause injury.
1. Remove the HVF front door, REP 11.1-171.
2. Remove the HVF top cover, REP 11.1-171.
3. Remove the HVF front cover, REP 11.1-171.
4. Remove the HVF rear cover, REP 11.1-171.
5. Figure 1. Remove the black plastic cover.
2
Lift out the cover
Figure 1 Cover removal.
Repairs/Adjustments
REP 11.40-171
6. Figure 2. At the front of the HVF, remove the circlip and bush.
1
Press in the catches,
(2 places)
August 2007
4-494
Remove the circlip
and bush
Figure 2 Circlip and bush removal.
WorkCentre 5687 Family