Table of Contents
Advertisement
ADJ 3.1 Registration Setup
Purpose
To measure and adjust image to paper registration. Refer to dC604 Registration Setup.
WorkCentre 5687 Family
ADJ 3.2 Magnification Adjustment
Purpose
To adjust the machine magnification to 100%
Adjustment
NOTE: There are no across process direction adjustments.
1.
Select 100% magnification.
2.
Use the internal registration test pattern.
3.
Make a copy from the document glass or through the DADH.
4.
Measure the process direction dimension, IQS 8 Magnification.
5.
Enter dC131, select 05-009 for the DADH adjustment or 14-027 for the document glass
adjustment. An entry of less than the default value will increase the dimension B.
6.
Repeat the above steps until the dimension on the copy is the same as on the print.
If the across process dimension is not within the tolerances specified and the customer is dis-
satisfied, install a new scanner module, (32-55 ppm) PL 14.20 Item 1 or (65-87 ppm) PL 14.10
Item 1.
August 2007
4-601
Repairs/Adjustments
ADJ 3.1, ADJ 3.2
Hide quick links:
Advertisement
Chapters
Table of Contents
