Xerox WorkCentre 5687 Series Service Manual page 1162

6. Remove the drive roll assembly, Figure 4.
1
Remove the drive roll
assembly
Figure 4 Drive roll assembly
Replacement
1. Replacement is the reverse of the removal procedure.
2. Ensure that the ground strap is routed between the frame and the bearing. Figure 5.
Ground strap
Figure 5 Ground strap position
Repairs/Adjustments
REP 8.26, REP 8.27
REP 8.27 Registration Transport Drive Belt
Parts List on PL 8.15
Removal
Switch off the electricity to the machine, GP 14. Disconnect the power cord from the
customer supply while performing tasks that do not need electricity. Electricity can
cause death or injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
1. Remove the registration transport, REP 8.4.
2. Remove the drive belt, Figure 1.
Replacement
Replacement is the reverse of the removal procedure.
Bearing
August 2007
4-142
WARNING
WARNING
1
Remove the drive belt
Figure 1 Drive belt
WorkCentre 5687 Family