11-024-171, 11-026-171 Paddle Roller Position RAP
11-024-171 The paddle roller has failed to return to the home position.
11-006-171 The paddle roller has failed to move from the home position.
Initial Actions
WARNING
Switch off the electricity to the machine, GP 14. Disconnect the power cord from the
customer supply while performing tasks that do not need electricity. Electricity can
cause death or injury. Moving parts can cause injury.
Check for damage or any obstruction that would prevent paddle movement. If necessary,
install new components.
Procedure
Figure 1 shows the location of the components.
Enter dC330, code 11-326. Manually operate the paddle roller home sensor, Q11-326, Figure
1. The display changes.
Y
N
Go to Flag 1. Check the wiring and repair as necessary, REP 1.2. Check the paddle roller
home sensor, Q11-326. Refer to:
•
GP 11 How to Check a Sensor.
•
P/J201, HVF control PWB.
•
11A-171 HVF Power Distribution RAP.
Install new components as necessary:
•
Paddle roller home sensor, PL 11.145.
•
HVF control PWB, PL 11.157 Item 2.
Enter dC330, code 11-025 Paddle Roll Motor Run, to check the movement of the paddle, Fig-
ure 1. The paddle turns.
Y
N
Go to Flag 2. Check the wiring and repair as necessary, REP 1.2. Check the paddle roller
motor, MOT11-025. Refer to:
•
GP 10 How to Check a Motor.
•
P/J202, HVF control PWB.
•
11A-171 HVF Power Distribution RAP.
Install new components ad necessary:
•
Paddle roller motor, PL 11.145.
•
HVF control PWB, PL 11.157 Item 2.
Perform SCP 6 Final Actions.
WorkCentre 5687 Family
Paddle roller
home sensor
Q11-326
Figure 1 Component location
August 2007
2-537
Paddle roller
motor
MOT11-025
Status Indicator RAPs
11-024-171, 11-026-171
Pusher