Xerox WorkCentre 5687 Series Service Manual page 1425

1
Attach the E-clip to
the tip of a magnetic
screwdriver
Figure 6 E-clip insertion
4. Install the remainder of the removed components by reversing the removal procedure.
NOTE: Ensure that the 4 screws removed in step 1 of Figure 5 are tightened in their orig-
inal position by carefully aligning the screw head with the witness marks on the frame.
WorkCentre 5687 Family
2
Slide the screwdriver and
E-clip along the frame.
Snap the E-clip into the
groove
August 2007
4-405
Repairs/Adjustments
REP 11.51-170