Xerox WorkCentre 5687 Series Service Manual page 1363

REP 11.14-170 BM Lower Diverter Solenoid
Parts List on PL 11.68
Removal
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
WARNING
Switch off the electricity to the machine GP 14. Disconnect the power cord from the cus-
tomer supply while performing tasks that do not need electricity. Electricity can cause
death or injury. Moving parts can cause injury.
1. Remove the rear cover, REP 11.1-170.
2. Figure 1, prepare to remove the lower diverter solenoid.
WorkCentre 5687 Family
2
1
Move motor
Remove 2
onto ledge
screws
Figure 1 Preparing to remove the solenoid
3. Figure 2, remove the solenoid armature and spring.
August 2007
4-343
4
3
Loosen
Remove
screw
screw
Repairs/Adjustments
REP 11.14-170