Xerox WorkCentre 5687 Series Service Manual page 1144

5. Remove the sensor from the support bracket, Figure 3.
2
Remove the sensor from
the support bracket
Figure 3 Remove the sensor
Repairs/Adjustments
REP 8.15
Replacement
1. Replacement is the reverse of the removal procedure. Refer to GP 6 before refitting
screws.
2. Locate the support bracket on the machine frame and tightened the screws, Figure 4.
1
Disconnect the harness
August 2007
4-124
1
Locate the tab on the
bracket in the hole on the
frame
2
Tighten two screws
Figure 4 Position of sensor
WorkCentre 5687 Family