Xerox WorkCentre 5687 Series Service Manual page 1476

REP 11.16-171 BM Flapper
Parts List on PL 11.80
Removal
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
WARNING
Switch off the electricity to the machine GP 14. Disconnect the power cord from the cus-
tomer supply while performing tasks that do not need electricity. Electricity can cause
death or injury. Moving parts can cause injury.
1. Open the HVF BM front door and fully pull out the BM module.
Repairs/Adjustments
REP 11.16-171
2. Figure 1, remove the BM flapper bracket assembly.
2
Disengage the
drive belt.
4
Remove the BM
flapper bracket
assembly.
Figure 1 Remove the BM flapper bracket
3. Figure 2, remove the BM flapper assembly.
August 2007
4-456
1
Remove 4 screws
3
and the ground
Disconnect the
wire.
BM flapper roll
home sensor.
WorkCentre 5687 Family