Xerox WorkCentre 5687 Series Service Manual page 1386

1
Remove KL-clip and pull shaft forward
50 mm (2 inches)
12. Figure 4, prepare to remove the BM stapler bracket assembly.
Repairs/Adjustments
REP 11.28-170
4
Push the shaft to the rear
to release the latch slide
2
Remove 2 E-clips
and the front follower
Figure 3 Latch shaft removal
3
Compress the spring, remove
the rear follower and spring
August 2007
4-366
5
Pull the shaft completely
to the rear to remove
WorkCentre 5687 Family