Xerox WorkCentre 5687 Series Service Manual page 1519

REP 11.44-171 HVF Buffer Lower Roll
Parts List on PL 11.155
Removal
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
WARNING
Switch off the electricity to the machine GP 14. Disconnect the power cord from the cus-
tomer supply while performing tasks that do not need electricity. Electricity can cause
death or injury. Moving parts can cause injury.
1. Remove the HVF front door, REP 11.1-171.
2. Remove the HVF top cover, REP 11.1-171.
3. Remove the HVF front cover, REP 11.1-171.
4. Remove the HVF rear cover, REP 11.1-171.
5. Open jam clearance guide 5b.
6. Figure 1. Remove the circlip and the bush from the outboard end of the roll.
Figure 1 Circlip and bush removal.
WorkCentre 5687 Family
Remove the circlip
and the bush
August 2007
4-499
7. Figure 2. At the rear of the HVF, remove the buffer lower roll.
1
2
Remove the circlip
Slide the pulley and the
bush along the shaft
REAR VIEW
Figure 2 Buffer lower roll removal.
Replacement
The replacement procedure is the reverse of the removal procedure.
5
Remove the buffer
lower roll
4
Remove the pulley and
the bush
3
Slip the belt off the
pulley
Repairs/Adjustments
REP 11.44-171