Xerox WorkCentre 5687 Series Service Manual page 955

Table 16 19-5XX Status codes
Status
Code UI Message Reason for Message
19-503 System memory is full etc. EPC memory resources low
19-504 No message EPC memory resources inter-
mediate
19-505 An image data error has Compressor DVMA time-out.
occurred etc. Fault 19-404 is raised.
19-506 Please wait, your job will Job delayed status
continue shortly. Do not
press the Start button again
19-507 System memory is full etc. Memory resources low
19-508 System memory is full etc. Internal memory handling sta-
tus
19-509 System memory is full etc. Internal memory job truncated Usage exceeds inter-
19-514 An image data error has 19-409
occurred etc.
19-515 - This status code becomes
active when fault 19-403 is
raised
WorkCentre 5687 Family
Reference / Action
Status
Memory becomes
Codes UI Message
available, job is can-
celled or documents 20-544 The Fax service is initialis-
are removed from ing. Please wait.
DADH. Perform 19-
401, 19-402, 19-403
RAP
20-545 Fax job could not be sent at
Clears automatically this time, please try again.
after being raised.
20-546 Not enough memory to use
Perform 19-404 RAP
fax services. Contact your
Perform 19-404 RAP system administrator.
High EPC usage. Per- 20-547 Fax memory is low. Contact
form 19-401, 19-402, your system administrator.
19-403 RAP
High EPC usage. Per- 20-550 A fax service error has
form 19-401, 19-402, occurred. Fax line 2 is
19-403 RAP unavailable. Fax line 1is still
available. Contact your sys-
Usage is above inter-
tem administrator.
mediate EPC usage
threshold. Perform 19- 20-556 A fax service error has
401, 19-402, 19-403 occurred. Press the power
RAP button on the left side of the
machine and choose quick
restart. If fault persists, call
mediate EPC usage
for assistance.
threshold. Perform 19-
401, 19-402, 19-403 20-558 A fax memory error has
RAP occurred. Contact your sys-
tem administrator.
Cleared when status
19-514 is raised. Per- 20-559 A fax service error has
form 19-409 RAP occurred. Press the power
button on the left side of the
Cleared when the cur-
machine and choose quick
rent job completes or
restart. If fault persists, call
when the job is
for assistance.
deleted. Perform 19-
401, 19-402, 19-403 20-562 No communication on fax
RAP line 1. Please check exter-
nal connection
20-563 No communication on fax
line 2. Please check exter-
nal connection
August 2007
2-763
Table 17 20-5XX Status codes
Reason for Message Reference / Action
Basic Fax card restarts User clears or time-
out. Install a new
compact flash, PL
20.10 Item 3
Error with image processing - User clears or times
fax command out (7 seconds)
This status code becomes Cleared when fault
active when fault 20-324 is 20-324 is cleared.
raised Perform 20-323, 20-
324 RAP
This status code becomes Perform 20-323, 20-
active when fault 20-323 is 324 RAP
raised
Extended card failure detected Install a new extender
card and reboot
Basic card failure detected Switch off the
machine, then switch
on the machine, GP
14.
Status active when fault 20- Cleared when fault
322 is raised 20-322 is cleared.
Perform 20-322 RAP
Status active when fault 20- Cleared when fault
320 is raised 20-320 is cleared.
Perform 20-320 RAP
Status active when fault 20- Cleared when fault
331 is raised 20-331 is cleared.
Perform 20-331, 20-
339, 20-341 RAP
Status active when fault 20- Cleared when fault
332 is raised 20-332 is cleared.
Perform 20-332, 20-
340 RAP
Status Indicator RAPs
OF4a