3
Remove the
latch (2 places)
1
Remove E-clip
(2 places)
Figure 4 Latch removal
6.
Figure 5, if necessary, remove the docking interlock switch or the docking pivot interlock
switch.
WorkCentre 5687 Family
2
Push out the
pin (2 places)
using a small
screwdriver
Replacement
Reverse the removal procedure to replace the removed components.
August 2007
4-309
Disconnect the harness
and press together the
catches to remove the
docking interlock switch
Disconnect the harness and
remove 2 screws to remove the
docking pivot interlock switch
Figure 5 Switches removal
Repairs/Adjustments
REP 11.33-130