Xerox WorkCentre 5687 Series Service Manual page 1594

REP 14.12A Scan Cables (32-55 ppm)
Parts List on PL 14.25
Removal
WARNING
Switch off the electricity to the machine, GP 14. Disconnect the power cord. Electricity
can cause death or injury. Moving parts can cause injury.
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
CAUTION
When moving the scan carriages, hold them by the metal parts only, to avoid damaging the
lamp or mirrors.
1. Remove the DADH, REP 5.19.
2. Remove the CVT glass and document glass, REP 14.6A.
3. Figure 1 shows the arrangement of the scan cables. Refer to this Figure 1 when installing
the cables.
Repairs/Adjustments
REP 14.12A
August 2007
4-574 WorkCentre 5687 Family