Xerox WorkCentre 5687 Series Service Manual page 1159

REP 8.25 Tray 5 Feed Sensor
Parts List on PL 8.45
Removal
WARNING
Switch off the electricity to the machine, GP 14. Disconnect the power cord from the
customer supply while performing tasks that do not need electricity. Electricity can
cause death or injury. Moving parts can cause injury.
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
1. Remove the top cover, PL 7.60 Item 10.
2. Prepare to remove the tray 5 feed sensor, Figure 1.
2
1
Remove eight screws
Disconnect the harness
marked A
Figure 1 Preparation
WorkCentre 5687 Family
3. Remove tray 5 feed sensor, Figure 2.
3
Lift the bracket
housing
August 2007
4-139
2
Press the tabs to release the
sensor
Figure 2 Remove the feed sensor
Repairs/Adjustments
REP 8.25