Xerox WorkCentre 5687 Series Service Manual page 1061

Lubricate the support pin
32-38 ppm black gears.
Figure 8 Main drives module 32-38 ppm
WorkCentre 5687 Family
Fuser drive gear
Lubricate the support pin
4. Manually rotate the main drive motor to engage the drive between the drives plate and the
inverter transport before tightening up the seven mounting screws, Figure 6.
5. Take care when connecting PJ1 on the IOT PWB, make sure to align the pins correctly.
6. If a new drives module or developer drive gear is installed, reset the developer count to
zero in the HFSI feature screen. Refer to GP 17 High Frequency service Items.
August 2007
4-41
45-55 ppm white gears
Figure 9 Main drive module 45-55 ppm
Fuser drive gear
Repairs/Adjustments
REP 4.1A