Xerox WorkCentre 5687 Series Service Manual page 1451

1
2
Pull out the BM module fully.
Disconnect the ground har-
ness. Secure the harness to
the harness retainers.
Figure 4 Preparation
7. Figure 5, Release the latches.
WorkCentre 5687 Family
3
Push down the left side latch
to release the slide from the
rail.
Figure 5 Releasing the slides
August 2007
4-431
2
Push the slide in fully.
1
Pull up the right side latch to
release the slide from the rail.
4
Push the slide in
fully.
Repairs/Adjustments
REP 11.61-170