Xerox WorkCentre 5687 Series Service Manual page 1165

4. Remove the takeaway roll assembly, Figure 3.
2
Remove the E-clip
Figure 3 Remove the takeaway shaft
WorkCentre 5687 Family
5. Remove the idler roll and shaft, Figure 4.
3
Press the tabs and
push the bearing out
4
Remove the takeaway
shaft
1
Remove the E-clip
Replacement
Replacement is the reverse of the removal procedure.
August 2007
4-145
1
Move the tabs to remove the idler rolls
and shaft
Figure 4 Remove the idler roll and shaft
Repairs/Adjustments
REP 8.29