Table of Contents
Advertisement
11-063-171, 11-411-171 HVF BM Staple Unit 1 Failure RAP
11-063-171 The HVF BM staple unit 1 has failed to leave the home position.
11-411-171 The HVF BM staple unit 1 has failed to return to the home position.
Initial Actions
WARNING
Switch off the electricity to the machine, GP 14. Disconnect the power cord from the
customer supply while performing tasks that do not need electricity. Electricity can
cause death or injury. Moving parts can cause injury.
•
Check that there is no damage or obstruction that would prevent the stapling unit from
cycling.
•
Check that the sheets of staples in the cartridge are feeding one at a time. If staple sheets
overlap, they will jam in the cartridge. If necessary, install a new staple cartridge, PL 26.10
Item 11.
•
Check for jammed staples in the stapler head.
•
Ensure that the customer job does not exceed the capacity of the booklet maker. Refer to
11D-171 Booklet Quality RAP for booklet maker quality specifications.
Procedure
Enter dC330, code 11-421 to check the BM staple head carrier closed sensor, Q11-421, Figure
1. Open and close the staple head carrier. The display changes.
Y
N
Go to Flag 1, check the BM staple head carrier closed sensor, Q11-421.
Refer to:
•
GP 11, How to Check a Sensor.
•
P/J552, BM PWB.
•
11A-171 HVF Power Distribution RAP.
Install new components as necessary:
•
BM staple head carrier closed sensor, PL 11.168 Item 18.
•
BM PWB, PL 11.166 Item 10.
Enter dC330, code 11-063 to run the BM SH1 motor, Figure 1. Stack the code 11-411 to check
the BM SH1 home switch. The display changes.
Y
N
The staple head cycled when the first code was entered.
Y
N
Go to Flag 3 and check the wiring and connectors between P/J560 and P/J585.
The wiring and connectors are good.
Y
N
Repair the wiring or connectors, REP 1.2.
Install a new BM staple head 1, PL 11.168 Item 7.
Go to Flag 2, check the BM SH1 home switch, S11-411.
Refer to:
•
GP 13, How to Check a Switch.
A
WorkCentre 5687 Family
A
•
P/J551, BM PWB.
•
11A-171 HVF Power Distribution RAP.
Install new components as necessary:
•
BM staple head 1, PL 11.168 Item 7.
•
BM PWB, PL 11.166 Item 10.
The fault may be intermittent, check for damaged wiring or bad connectors, REP 1.2. If neces-
sary install new components:
•
BM staple head 1, PL 11.168 Item 7.
•
BM PWB, PL 11.166 Item 10.
BM staple head 1
Figure 1 Component location
August 2007
2-549
BM staple head carrier
closed sensor, Q11-421
Status Indicator RAPs
11-063-171, 11-411-171
Hide quick links:
Advertisement
Chapters
Table of Contents
