Xerox WorkCentre 5687 Series Service Manual page 1235

2
Remove 2 screws.
3
Disconnect the
motor harness and
remove the hole
punch motor
assembly.
4
Remove the screw securing the sensor bracket. Discon-
nect the harnesses and remove the bracket assembly.
Press the tabs together to remove the punch head
home and punch head present sensors.
WorkCentre 5687 Family
5
Disconnect
the PJ.
Figure 1 Hole punch unit, motor and sensors
August 2007
4-215
6
Remove screw and slide out the bracket.
1
Remove the thumb
screw and slide out
the punch unit.
7
Remove 2 screws,
remove sensors
and disconnect the
harnesses.
Repairs/Adjustments
REP 11.7-110