Xerox WorkCentre 5687 Series Service Manual page 1213

REP 10.13 Fuser Web Motor Assembly
Parts List on (32-55 ppm) PL 4.17, (65-87 ppm) PL 4.12
Removal
WARNING
Switch off the electricity to the machine, GP 14. Disconnect the power cord from the
customer supply while performing tasks that do not need electricity. Electricity can
cause death or injury.
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
1. Remove the main drive module, (32-55 ppm) REP 4.1A, (65-87 ppm) REP 4.1B.
2. Disconnect PJ 154 on the main drive PWB and remove the fuser web motor assembly,
(32-55 ppm) Figure 1, (65-87 ppm) Figure 2.
2
Remove the fuser web
assembly
Figure 1 Drives module 32-55 ppm
WorkCentre 5687 Family
3. Remove the fuser connector assembly from the fuser web motor assembly, Figure 3.
1
Remove 3 screws
August 2007
4-193
2
Remove the fuser web assembly
Figure 2 Drives module 65-87 ppm
1
Remove 3 screws
Repairs/Adjustments
REP 10.13