Figure 6 Distributing developer
5.
Repeat steps 2 to 4 for the front of the magnetic roll.
NOTE: Two scoops of developer is the optimum amount to form a good seal. Do not use
more than three scoops.
6.
An example of a good magnetic seal is shown in Figure 7.
Repairs/Adjustments
ADJ 9.3
1
Distribute the developer
across the width of the mag-
netic strip.
1
A good magnetic seal should be an
even distribution of material along
the length of the magnetic seal.
August 2007
4-640
Figure 7 A good magnetic seal
WorkCentre 5687 Family