Xerox WorkCentre 5687 Series Service Manual page 1563

Crease roll
pulleys
Figure 2 Positioning The Diverter Gate Lever
Check that the diverter gate operates correctly before tensioning the crease roll drive belt.
WorkCentre 5687 Family
REP 11.75-171 Bin 1 Limit Switches
Parts List on PL 11.135
Removal
Take care during this procedure. Sharp edges may be present that can cause injury.
Diverter gate
lever
Switch off the electricity to the machine, GP 14. Disconnect the power cord from the
customer supply, while performing tasks that do not need electricity. Electricity can
cause death or injury. Moving parts can cause injury.
1. Remove the HVF rear cover, REP 11.1-171.
2. Disconnect the PJs and remove the upper or lower limit switch and bracket as required,
Figure 1.
Diverter gate
solenoid
August 2007
4-543
WARNING
WARNING
Repairs/Adjustments
REP 11.74-171, REP 11.75-171