Xerox WorkCentre 5687 Series Service Manual page 1641

CAUTION
When the under side of the input tray is cleaned, do not damage the restack arm, PL 5.35 Item
3.
14. Clean the input tray and the exit area below the input tray with a micro fiber wiper and
antistatic fluid.
15. Clean the CVT glass and the document glass. Refer to ADJ 14.1A Optics Cleaning Pro-
cedure (32-55 ppm) or ADJ 14.1B Optics Cleaning Procedure (65-87 ppm).
Retard roll
Key
Figure 1 Retard roll position
WorkCentre 5687 Family
ADJ 5.5 DADH Registration Adjustment
Parts List on PL 5.10
Purpose
To measure and adjust the image to paper registration.
Adjustment
Switch off the electricity to the machine, GP 14. Disconnect the power cord from the
customer supply while performing tasks that do not need electricity. Electricity can
cause death or injury. Moving parts can cause injury.
Reset the DADH registration, refer to dC604 Registration Setup Procedure.
August 2007
4-621
WARNING
Repairs/Adjustments
ADJ 5.4, ADJ 5.5