Xerox WorkCentre 5687 Series Service Manual page 1330

REP 11.34-130 Compiler Carriage Belt Grips
Parts List on PL 11.46
Removal
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
WARNING
Switch off the electricity to the machine GP 14. Disconnect the power cord from the cus-
tomer supply while performing tasks that do not need electricity. Electricity can cause
death or injury. Moving parts can cause injury.
1. Remove the compiler carriage assembly, REP 11.2-130.
2. Figure 1, remove the compiler carriage belt grips.
Repairs/Adjustments
REP 11.34-130
2
Remove 3 screws
3
Cut the cable tie and
remove the rear grip
Figure 1 Removing grips
Replacement
Reverse the removal procedure to replace the compiler carriage belt grips.
August 2007
4-310
1
Remove 3 screws and the front grip
WorkCentre 5687 Family