Xerox WorkCentre 5687 Series Service Manual page 1356

3. Figure 2, Remove the upper paper guide.
1
Remove 4 screws
Figure 2 Removing guide
Replacement
Reverse the removal procedure to replace the upper paper guide.
Repairs/Adjustments
REP 11.8-170, REP 11.9-170
REP 11.9-170 HCSS BM Upper Diverter Gate and Solenoid
Parts List on PL 11.66
Removal
Take care during this procedure. Sharp edges may be present that can cause injury.
Switch off the electricity to the machine GP 14. Disconnect the power cord from the cus-
tomer supply while performing tasks that do not need electricity. Electricity can cause
death or injury. Moving parts can cause injury.
1.
2.
3.
4.
2
Remove 2 screws
3
Release the guide
from the 4 locating
features and remove
August 2007
4-336
WARNING
WARNING
Remove the top cover, rear cover, front door, upper left cover and front infill cover, REP
11.1-170.
Remove the diverter solenoid cover, one screw.
Remove the upper paper guide, REP 11.8-170.
Figure 1, prepare to remove the diverter gate.
WorkCentre 5687 Family