Xerox WorkCentre 5687 Series Service Manual page 1497

11. Figure 3, remove the latch shaft.
1
Remove KL-clip and pull shaft forward
50 mm (2 inches)
2
Remove 2 E-clips and
the front follower
WorkCentre 5687 Family
4
Push the shaft to the rear
to release the latch slide
Figure 3 Latch shaft removal
August 2007
3
Compress the spring, remove
the rear follower and spring
4-477
5
Pull the shaft completely
to the rear to remove
Repairs/Adjustments
REP 11.28-171