Table of Contents
Advertisement
4.
Remove the sensor, if necessary, by releasing the sensor legs.
Replacement
1.
If necessary, install the sensor and/or motor in the bracket.
2.
Reconnect the ground wire and harnesses.
3.
Ensure that the white plastic worm is fully located on the drive lugs of the motor, Figure 1.
4.
Locate the motor assembly, ensuring that the nose of the white plastic worm is located in
the bearing in the frame, Figure 1, install the two securing screws.
5.
Reinstall the top cover.
Repairs/Adjustments
REP 11.21-130, REP 11.22-130
REP 11.22-130 CC Top Baffle Assembly
Parts List on PL 11.47
Purpose
This procedure is used to repair the following components:
•
Carriage top baffle, PL 11.47 Item 12.
•
Carriage top baffle return spring, PL 11.47 Item 13.
•
Top baffle idler, PL 11.47 Item 14.
•
Top baffle idler spring, PL 11.47 Item 15.
Removal
Take care during this procedure. Sharp edges may be present that can cause injury.
Switch off the electricity to the machine GP 14. Disconnect the power cord from the cus-
tomer supply while performing tasks that do not need electricity. Electricity can cause
death or injury. Moving parts can cause injury.
1.
Remove the compiler carriage, REP 11.2-130.
2.
Figure 1, remove the top baffle assembly
August 2007
4-292
WARNING
WARNING
WorkCentre 5687 Family
Hide quick links:
Advertisement
Chapters
Table of Contents
