Xerox WorkCentre 5687 Series Service Manual page 1336

REP 11.40-130 CC Nip Shaft Components
Parts List on PL 11.48
Purpose
This procedure is used to repair the following components:
• Nip roll, PL 11.48 Item 2.
• Nip shaft, PL 11.48 Item 3.
• Nip spring, PL 11.48 Item 4.
Removal
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
WARNING
Switch off the electricity to the machine GP 14. Disconnect the power cord from the cus-
tomer supply while performing tasks that do not need electricity. Electricity can cause
death or injury. Moving parts can cause injury.
1. Remove the compiler carriage assembly, REP 11.2-130.
2. Figure 1, improve the access to the area.
Repairs/Adjustments
REP 11.40-130
1
Remove the
harness cover
Figure 1 Improving access
3. Figure 2, remove the entrance baffle cover.
August 2007
4-316
2
Open the top baffle and
fix in the open position
using adhesive tape
WorkCentre 5687 Family