Xerox WorkCentre 5687 Series Service Manual page 1347

REP 11.3-170 Staple Head Unit 1 Assembly and SH1 Paper
Sensor
Parts List on PL 11.72
Removal
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
WARNING
Switch off the electricity to the machine, GP 14. Disconnect the power cord from the
customer supply, while performing tasks that do not need electricity. Electricity can
cause death or injury. Moving parts can cause injury.
1. Remove the top cover, REP 11.1-170.
2. Remove bin 0, PL 11.60 Item 15.
3. Remove the upper paper guide, REP 11.8-170.
4. Remove bin 1, REP 11.5-170.
5. Figure 1, lower the front of the compiler carriage.
WorkCentre 5687 Family
4
Lower the front of the
carriage
Figure 1 Carriage position
6. Figure 2, release the compiler input guide.
August 2007
4-327
3
Remove 2 screws
2
1
Support the weight of
Remove the front
the compiler carriage
support
Repairs/Adjustments
REP 11.3-170