Xerox WorkCentre 5687 Series Service Manual page 1281

REP 11.5-130 Bin 1 or Bin 2 Assembly
Parts List on PL 11.52 and PL 11.54
Removal
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
NOTE: The Bin 1 assembly must be removed before the bin 2 assembly.
WARNING
Switch off the electricity to the machine, GP 14. Disconnect the power cord from the
customer supply, while performing tasks that do not need electricity. Electricity can
cause death or injury. Moving parts can cause injury.
1. Remove the HCSS top cover, rear cover, front door and front cover, REP 11.1-130.
2. Remove bin 1 assembly.
a. Release the harness from the support next to the HCSS PWB.
b. Disconnect PJ416 and PJ424 on the HCSS PWB.
c. Remove the bin 1 assembly, Figure 1.
WorkCentre 5687 Family
2
Remove screw
Figure 1 Bin 1 assembly removal
3. Remove bin 2 assembly.
August 2007
4-261
1
Remove screw
3
Lift and remove the bin
assembly
Repairs/Adjustments
REP 11.5-130