REP 5.11 Exit Sensor
Parts List on PL 5.30
Removal
WARNING
Switch off the electricity to the machine, GP 14. Disconnect the power cord from the
customer supply while performing tasks that do not need electricity. Electricity can
cause death or injury. Moving parts can cause injury.
1.
Raise the DADH.
CAUTION
Be careful to prevent damage to the document pad when the document pad is removed from
the baffle assembly.
2.
Prepare to remove the exit sensor, Figure 1.
Repairs/Adjustments
REP 5.11
3
Disengage the lugs in the lower
cover.
4
Remove the lower cover.
3.
Remove the exit sensor, Figure 2.
August 2007
4-68
2
Remove 2 screws.
1
Carefully remove the left hand end of the
document pad from the baffle assembly.
Figure 1 Preparation
WorkCentre 5687 Family