Xerox WorkCentre 5687 Series Service Manual page 1167

3. Preparation to remove the transport roll assembly, Figure 2.
3
Remove the belt and
drive gear
Figure 2 Preparation
WorkCentre 5687 Family
1
Remove the E-clip
2
Remove the coupling
August 2007
4. Remove the transport roll assembly, Figure 3.
Figure 3 Remove the transport roll assembly
Replacement
Replacement is the reverse of the removal procedure.
4-147
1
Remove the E-clip
2
Remove the E-clip
3
Press the tabs and push
the bearing out
4
Remove the transport
roll assembly
Repairs/Adjustments
REP 8.30