Xerox WorkCentre 5687 Series Service Manual page 1188

2
Slide the erase lamp out of
the support
1
Lift the tab at the end of the erase lamp
Figure 2 Remove the erase lamp
Replacement
Replacement is the reverse of the removal procedure.
Check that the location posts on the erase lamp (Figure 2), locate in the holes in the frame,
Figure 3.
Figure 3 Location holes
Repairs/Adjustments
REP 9.9
Rear location posts
Front posts
Location holes
Erase lamp connector
August 2007
4-168 WorkCentre 5687 Family