Xerox WorkCentre 5687 Series Service Manual page 1678

Figure 2 Lock the crease gate
11. Figure 3, loosen the crease blade screws.
Repairs/Adjustments
ADJ 11.4-170
2
Insert an interlock cheater in
the teeth as shown to prevent
the gate from falling.
1
Lift the gate to the highest
position.
Loosen 10 screws marked A.
12. Fully insert the crease blade by turning the crease blade knob (6d), PL 11.80 Item 4, to
the right until the arrow points down.
13. Figure 4, set the crease blade in the correct position.
August 2007
4-658
Figure 3 Blade loosening
WorkCentre 5687 Family