Xerox WorkCentre 5687 Series Service Manual page 1472

REP 11.13-171 HVF / HVF BM Un-Docking
Removal
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
WARNING
Switch off the electricity to the machine GP 14. Disconnect the power cord from the cus-
tomer supply while performing tasks that do not need electricity. Electricity can cause
death or injury. Moving parts can cause injury.
CAUTION
Do not show the customer how to un-dock the HVF / HVF BM.
1. Open the front door.
Repairs/Adjustments
REP 11.13-171
2. Figure 1, release the docking latch and move the HVF / HVF BM to the right, away from
the IOT.
Figure 1 Docking latch location
NOTE: Where fitted, the tri folder may remain docked to, and moved with, the HVF.
3. Disconnect the harnesses between the IOT and the HVF / HVF BM if necessary.
August 2007
4-452
1
Pull the lever forward to release both latches
2
Roll the HVF to the right
away from the IOT
WorkCentre 5687 Family