Xerox WorkCentre 5687 Series Service Manual page 1176

REP 8.38 Tray 5 Takeaway Roller
Parts List on PL 8.45
Removal
WARNING
Switch off the electricity to the machine, GP 14. Disconnect the power cord from the
customer supply while performing tasks that do not need electricity. Electricity can
cause death or injury. Moving parts can cause injury.
WARNING
Take care during this procedure. Sharp edges may be present that can cause injury.
1. Remove the rear cover, PL 7.60 Item 9.
2. Remove the top cover, PL 7.60 Item 10
3. Remove the transport drive belt, REP 8.33.
4. Prepare to remove the upper feed assembly, Figure 1.
2
3
Remove two screws
Lift the upper feed
assembly
Figure 1 Preparation
Repairs/Adjustments
REP 8.38
5. Lift the upper feed assembly and remove the lower feed assembly, Figure 2.
1
Lift the upper feed
assembly
6. Remove the one way pulley clutch, Figure 3.
1
Remove two screws
August 2007
4-156
2
Remove the lower feed
assembly
Figure 2 Remove lower feed assembly
3
Remove the E-clip
and bearing
2
Remove the one way pulley clutch
1
Remove the E-clip
Figure 3 Remove the one-way pulley clutch
WorkCentre 5687 Family
4
Remove the E-clip
and bearing f