Scanner Application Card Failure Rap - Xerox WorkCentre 5687 Series Service Manual

14-730 Scanner Application Card Failure RAP

14-730 There is no response or an incorrect response to the command issued by the scan ser-
vice.
Procedure
Switch off the machine, then switch on the machine, GP 14.
WorkCentre 5687 Family
14A Scanning Document Size Entry RAP
The scanner has encountered a document that is larger than expected.
The scanner has encountered a document of unknown size. The document size sensors have
incorrectly determined the size of the original.
Procedure
Switch off the electricity to the machine, GP 14. Disconnect the power cord from the
customer supply while performing tasks that do not need electricity. Electricity can
cause death or injury. Moving parts can cause injury.
Identify the speed of the machine, refer to SCP 7 Machine Features. Perform one of the steps
that follow:
• If the speed of the machine is between 35 and 55 ppm, go to the 14B Scanning Document
Size RAP (32-55 ppm).
• If the speed of the machine is between 65 and 87 ppm, go to the 14C Scanning Docu-
ment Size RAP (65-87 ppm).
August 2007
2-687
WARNING
Status Indicator RAPs
14-730, 14A