Table of Contents
Advertisement
HCSS and HCSS BM Upper Exit Cover Nip Rollers
1.
Open the upper exit cover.
2.
Figure 14, use plastislip grease, PL 26.10 Item 8, to lubricate the eight nip rollers in the
upper exit cover.
2
Apply grease to both ends of
the roller axle
4
Repeat the greasing
operation for the
remaining 7 rollers
Figure 14 Nip roller lubrication
3.
Close the upper exit cover.
WorkCentre 5687 Family
1
Spring open the legs of a
holder to release a roller
3
Spring open the legs of the
holder to install a roller
HCSS Compiler Carriage Elevator Motor Worm And Gear
Parts list on: PL 11.44.
1.
Remove the HCSS rear cover, REP 11.1-130.
2.
Figure 15, use plastislip grease, PL 26.10 Item 8, to lubricate the worm and gear.
Figure 15 Worm and gear lubrication
3.
Re-install the HCSS rear cover, REP 11.1-130.
August 2007
4-611
Apply grease to the
worm and gear
Repairs/Adjustments
ADJ 4.1
Hide quick links:
Advertisement
Chapters
Table of Contents
