Toyota Tundra 2005 Service - Repair - Maintenance page 3363

SST
SST
SST
Battery
BODY
(c) Check the functioning of SST (see step 1-(a)).
SST
(1)
Battery
AB0158
(d) Install the SST.
(1)
SST
NOTICE:
To avoid damaging the SST connector and wire harness,
do not lock the secondary lock of the twin lock.
H11402
(2)
NOTICE:
Place the front seat outer belt as shown in the illustration.
(3)
NOTICE:
SST
Take care not to damage the SST wire harness.
(e) Activate the seat belt pretensioner.
H11521
(1)
(2)
(3)
HINT:
The seat belt pretensioner operates simultaneously as the LED
of the SST activation switch lights up.
10 m or more
- SEAT BELT PRETENSIONER
09082-00700, 09082-00740
Disconnect the SST from the battery.
Connect the 2 SST, then connect them to the seat
belt pretensioner.
09082-00700, 09082-00740
Place the front seat outer belt on the ground and
cover it with the disc wheel with tire.
Move the SST at least 10 m (33 ft) away from the
disc wheel.
Connect the SST red clip to the battery positive (+)
terminal and black clip to the battery negative (-)
terminal.
Check that no one is within 10 m (33 ft) area around
the disc wheel.
Press the SST activation switch and activate the
seat belt pretensioner.
Author :
BO-249
R05181
Date :
5020