Toyota Tundra 2005 Service - Repair - Maintenance page 3433

AC-68
AIR CONDITIONING - RECEIVER
REMOVAL
1. DISCHARGE REFRIGERANT FROM REFRIGERATION
SYSTEM
HINT:
At the time of the installation, refer to the following:
z
Evacuate air from the refrigeration system.
z
Charge the system with refrigerant and inspect for leak-
age of refrigerant.
Specified amount:
Access cab, Standard cab:
600 ± 50 g (21.16 ± 1.76 oz.)
2. DISCONNECT 2 LIQUID TUBES FROM RECEIVER
Remove the 2 bolts and disconnect both tubes.
Torque: 5.4 N·m (55 kgf·cm, 48 in.·lbf)
NOTICE:
Cap the openings immediately to keep moisture or dirt out
of the system.
HINT:
At the time of the installation, refer to the following:
Lubricate 2 new O-rings with compressor oil and install them
I11138
to the tubes.
3. REMOVE RECEIVER
(a) Remove the holder bolt and pull the receiver downward.
HINT:
At the time of the installation, refer to the following:
If the receiver is replaced, add compressor oil to the compres-
sor.
Add 20 cc (0.71 fl.oz.)
Compressor oil: ND-OIL 8 or equivalent
(b) Remove the bolt and holder.
Author : Date :
AC277-03
5095