Toyota Tundra 2005 Service - Repair - Maintenance page 3384

1GR-FE:
1GR-FE:
Water Pump
P/S Pump
Idler No.2
Crankshaft
Idler No.1 A/C Compressor
2UZ-FE:
AIR CONDITIONING
INSTALLATION
1.
(a)
(b)
(c)
I28949
(d)
Generator
Idler No.2
Tensioner
(e)
I28950
2.
Turn the drive belt tensioner counterclockwise and install the
drive belt.
EM6656
- DRIVE BELT
1GR-FE engine:
INSTALL DRIVE BELT
While turning the belt tensioner counterclockwise, align
the holes. Insert a 6 mm (0.24 in.) bar into the holes to fix
the belt tensioner.
Install the drive belt.
While turning the belt tensioner counterclockwise, re-
move the bar.
If it is hard to install the drive belt, perform the following
procedures:
(1) Wrap the drive belt around all the pulleys and idlers,
except for the P/S pump, as shown in the illustra-
tion.
(2) While releasing belt tension by turning the belt ten-
sioner counterclockwise, wrap the drive belt around
the P/S pump.
Install the engine under cover.
2UZ-FE engine:
INSTALL DRIVE BELT
Author :
AC-19
AC3SC-01
Date :
5046