Correct
A
2UZ-FE:
B
AIR CONDITIONING
DRIVE BELT
ON-VEHICLE INSPECTION
1.
Check that the drive belt fits properly in the ribbed grooves.
Wrong
CH0086
2.
Check that nothing gets caught in the tensioner by turning it
clockwise and counterclockwise.
If a malfunction exists, replace the tensioner.
3.
Check that the tension is within the range A on the auto tension-
er scale.
If the tension is not within the range A on the scale, replace the
belt with a new one.
HINT:
When replacing the drive belt with a new one, the belt tension
should be within range B on the belt tensioner scale.
B00808
-
DRIVE BELT
INSPECT DRIVE BELT'S INSTALLATION CONDITION
1GR-FE engine:
INSPECT DRIVE BELT TENSIONER
2UZ-FE engine:
INSPECT DRIVE BELT TENSION
Author :
AC-17
AC3SB-01
Date :
5044